Case 580E SS, 1985 Technical Specifications

Case 580E SS, 1985 Technical Specifications: Advantages and Disadvantages

Introduction

The Case 580E SS is a backhoe loader, a versatile piece of construction equipment that combines a wheel loader on the front and an excavator on the rear. The 1985 model is a popular choice among construction firms due to its sturdy construction and reliable engine. In this article, we will analyze the key features and specifications of the machine and discuss both their advantages and disadvantages.

SideShift or CenterMount SS

The SideShift feature allows the operator to move the backhoe from side to side, providing greater flexibility when working in tight spaces. However, the CenterMount feature provides greater stability when working with heavy loads. Therefore, the choice between SideShift or CenterMount depends on the nature of the work. For example, if the job requires precision excavation, SideShift is the better choice. But, for heavy lifting and handling, CenterMount is preferred.

SAE dig depth (mm) and Reach @ ground level (mm)

The SAE dig depth of 4260mm and reach of 6820mm enable the machine to excavate deeper and reach further. This feature provides operators with the capability to tackle a wider variety of tasks. For example, the ability to reach deeper levels can be useful in digging trenches for pipes, cables, or conduits. However, the downside to having a deeper dig depth is a slower cycle time, which could lead to increased overall job time.

Loading height (mm) and Bucket width, min-max (mm)

The loading height of 3270mm may be a disadvantage in some situations, such as when the machine needs to load material onto a high truck bed. On the other hand, the bucket width range, min-max (300-900mm), offers versatility by allowing for different sizes of buckets to be used depending on the job. This feature is advantageous, as larger buckets are better for moving larger volumes of material quickly, while smaller buckets are required for precision work.

Bucket breakout (kgf) and Dipper breakout (kgf)

The bucket breakout value of 4800kgf indicates that the machine can effortlessly tackle hard or compacted soil and materials like gravel or rocks. This feature is essential in ensuring that the machine continues to operate smoothly under tough conditions. However, the dipper breakout value of 2600kgf could be limiting in some cases, such as when the operator needs to dig deeper in tough ground conditions.

Slew System

The Slew System on the Case 580E SS refers to the ability to rotate the backhoe 360 degrees. This feature allows for more efficient digging by eliminating the need to move the machine to access different work areas. It improves maneuverability and precision at different angles in difficult spaces and hard-to-reach areas. However, if the job site has limited access, the Slew System may not be essential.

Loader Bucket Capacity (m3) and Dump height (mm)

The 0.8m3 Loader Bucket Capacity is advantageous in moving large volumes of materials at once, reducing job time. However, the dump height of 3250mm could become limiting, as taller trucks may require the operator to dump some of the load on the ground before loading into the truck.

Engine Make & Model, Engine Power (kW@rpm) and Engine Displacement (lit)

The Case 4-390 diesel engine is known to be durable and reliable, providing sufficient power when compared to other engines in the same class. At 47kW with a maximum RPM of 2200, the engine has adequate power to handle the heavy loads of construction work. However, newer machines have more powerful engines, which are more fuel-efficient. The engine displacement is not provided in the specifications, which could negatively affect the engine’s efficiency.

Number of cylinders, Pump Type, Pump Flow (lit/min), and Relief Valve Pressure (bar)

The number of cylinders is not mentioned in the documentation, making it difficult to determine their impact. The hydraulic system’s gear pump type operates at a flow rate of 114 litres per minute, providing enough hydraulic fluid to power all of the machine’s hydraulic systems. The relief valve pressure of 138 bars ensures that the system operates at or below the specified pressure level, preventing damage to the components. Overall, these specifications are common in backhoe loaders in the same class, so there are no significant concerns.

Transmission type, Drive, Speeds, and Maximum speed (km/h)

The mid-range PS TC (powershift transmission with torque converter) provides smooth shifting under load, making the machine easier to operate. It has two drive options, 2WD and 4WD, which the operator can choose according to the terrain and job requirements. The 44 forward-reverse speeds provide versatility in the range of speeds for different tasks. The maximum speed of 37km/h is faster than most backhoe loaders of the same class, reducing transport time. The downside is that higher speeds can be dangerous, causing accidents like rollovers on uneven terrain.

Ride Control (Std/Opt/NA), Travel length (mm), Travel height (mm), Width (mm), and Turn circle radius without brakes (mm)

The Ride Control feature is not mentioned in the given specifications. The travel length of 5800mm enables the machine to cover long distances without requiring transportation. The travel height of 3590mm allows it to pass through underpasses or low height barriers. The width of 2110mm is narrow enough to fit into tight spaces. The turn circle radius without brakes of 7400mm allows the machine to maneuver easily in confined spaces without damaging buildings, sidewalks, or landscaping.

Operating weight (kg)

The operating weight of 5860kg is heavy enough to provide stability when lifting heavy loads. The downside is that it could cause damage to weight-sensitive surfaces like pavements and roads.

Overall Assessment

The Case 580E SS, 1985 Technical Specifications overall, provide a complete package of features that cater to most job site demands. The sturdy construction, mid-range power engine, versatile bucket, and hydraulic system capabilities make it a preferred choice for construction companies. This machine offers improved productivity, efficiency and reduces overall job time. However, certain limitations are observed in the specifications, such as the lack of engine displacement, lower dipper breakout values, and higher operating weight. Nonetheless, the advantages outweigh the disadvantages.