Case 580SLE 2WD RC, 2002: Features and Technical Specifications

Case 580SLE 2WD RC, 2002 Technical Specifications

1. SideShift or CenterMount: Both of these features offer a versatile digging and loading experience, allowing the operator to tailor the task being performed to the job site and equipment. These features enable the operator to load and unload materials from either side of the machine, and dig and scoop with greater accuracy and precision. A real-world example of this benefit would be when excavating trenches, sidewalks, or other areas where pre-determined design dimensions need to be maintained.

2. SAE dig depth (mm): 4220. This provides a greater reach and depth than a traditional loader and greatly increases the range of applications that can be executed by the machine. For example, the higher dig depth allows the operator to excavate larger trenches and access materials that are further down below the surface.

3. Reach @ ground level (mm): 5360. This allows the loader to reach and transport materials that are further away than usual, which helps to increase productivity. For instance, this is particularly useful when working on construction sites where supplies and materials are not located close to the work area.

4. Loading height (mm): 3490. Being able to lift materials and supplies to a greater height than regular loaders provides multiple benefits for the operator. This makes the machine suitable for loading items into higher places, such as the back of a truck, or loading materials onto a scaffolding platform for construction.

5. Bucket width, min-max (mm): 300-900. This wide range of bucket widths provides greater accuracy when scooping, loading, and unloading different materials. For example, when grading a surface, the operator can easily and accurately level the surface by controlling the width of the bucket to exactly match the required grade.

6. Bucket breakout (kgf): 5720. A higher bucket breakout means that the machine can lift heavier and larger pieces of materials with ease, making it more suitable for loading larger pieces at a time and transporting them to the desired location. This can be useful in landscaping projects, where large boulders or trees need to be transported.

7. Dipper breakout (kgf): 3487. The high dipper breakout allows the machine to dig heavier materials such as hard and compacted soils, gravels, and stones with relative ease. This is useful in applications such as landscaping projects, where the soil needs to be dug up and the surface leveled.

8. Slew System: Twin ram. Twin rams provide more stability and greater boom movement than a single ram, allowing for greater precision when scooping and digging. This can be useful in applications such as when excavating smaller, more precise trenches and trenches with tight turning corners.

9. Engine Make & Model: Case4T-390. This model of engine provides great power output and fuel efficiency, meaning the loader can complete the task in less time and with greater efficiency.

10. Engine power (kW@rpm): 68@2200. This power output is suitable for heavier-duty tasks such as dredging and excavation. It also helps to reduce the machine’s noise output and fuel consumption, making it a cost-effective option in comparison to other engines.

11. Pump type: Gear. This type of pump provides greater pressure to the hydraulic system which allows for faster and smoother movements of the arm and bucket. This can make completion of hydraulic excavations faster and smoother, allowing for greater efficiency and productiveness.

12. Pump flow (lit/min): 144. Higher pump flow results in greater speed when executing a task, reducing the time needed to complete it.

13. Relief valve pressure (bar): 210. The relief valve protects the machine from overloading by providing higher pressure tolerance. This is especially beneficial when working in difficult terrain and in challenging conditions.

14. Transmission type: P’Shuttle, TC. This transmission type not only provides efficiency under full power and load, but also gives greater control during tasks as the power is transferred directly to the wheels rather than gears. This allows for greater precision when scooping, loading, and unloading materials, making it optimal for precision applications.

15. Drive: 2WD. The two-wheel drive makes the machine suitable for working on flat, even surfaces. This makes it suitable for tasks such as loading and unloading materials from trucks and trailers, hauling soil at construction sites, and other work that requires less difficult terrain.

16. Speeds, FR: 44. This allows for faster speeds than regular loaders, making it ideal for moving materials quickly and efficiently over large distances. This is especially advantageous in tasks such as bringing materials to the job site or transporting materials from a site to another.

17. Maximum speed (km/h): 34.5. This higher speed allows operators to get the task done quickly, whether they are moving long distances or just loading and unloading materials. This particularly useful in applications such as bringing materials to job sites, taking loads of soil to dump sites, and so on.

18. Ride control (Std/Opt/NA): Std. This system helps the operator control the machine’s movement and operation, providing smoother, more accurate performance. This is optimal for applications such as loading and unloading materials from trucks, flattening land surfaces, and other precision tasks.

19. Travel length (mm): 5580. With a longer travel length, the machine is able to cover a greater distance and traverse more challenging terrain. This is beneficial for tasks such as transporting materials from the job site to a nearby landfill, for example.

20. Travel height (mm): 3420. With a higher travel height, the driver can observe the terrain more accurately. This is advantageous in tasks such as hauling debris away or carrying materials to higher places such as scaffoldings.

21. Width (mm): 2360. The relatively wide width of the machine provides stability, making it suitable for moving heavier loads and traversing hilly or uneven terrain. This enables the operator to complete tasks such as excavating with greater accuracy and safety.

22. Operating weight (kg): 7070. The lightweight design allows the loader to move quickly and precisely, making it particularly suitable for precision tasks. This can include applications such as grading a surface, loading materials, or excavating in more difficult terrain.