Case 580SM Series II 4WD PS Ext*, 2005: Features and Technical Specifications

Case 580SM Series II 4WD PS Ext*, 2005 Technical Specifications

Introduction

The Case 580SM Series II 4WD PS Ext* is a highly capable backhoe/loader combination that is well-suited for a wide range of construction and agricultural applications. With a variety of features and specifications designed to enhance its performance and usability, the machine is a popular choice for many operators in the industry. In this article, we will analyze the advantages and disadvantages of the machine’s various features and specifications.

Advantages and Disadvantages

SideShift or CenterMount

The Case 580SM Series II 4WD PS Ext* is available with either a SideShift or CenterMount configuration. This feature allows the operator greater flexibility in using the backhoe attachment in tight areas where maneuverability is limited. The SideShift configuration is especially useful in situations where the machine must operate alongside buildings or other structures, while the CenterMount configuration is better suited to open areas where greater reach is required.

However, there are some drawbacks to this feature. The SideShift configuration may be more difficult to control than the CenterMount configuration, and the operator must be careful to avoid damaging the machine or its surroundings when using this feature.

SAE Dig Depth and Reach @ Ground Level

The Case 580SM Series II 4WD PS Ext* has an SAE dig depth of 5560mm and a reach of 6650mm at ground level. These specifications make the machine well-suited for digging and excavation tasks, allowing it to reach deep into the earth and move large quantities of material quickly and efficiently.

However, the machine’s reach and dig depth may be limited in certain situations, such as when operating in areas with limited clearance or in very soft or hard soil conditions. In these cases, alternative equipment may be required to complete the job.

Loading Height, Bucket Width, and Breakout Force

The loading height of the machine is 4040mm, while its bucket width can range from 300mm to 900mm. The machine’s breakout force is also impressive, with a bucket breakout force of 5815kgf and a dipper breakout force of 2556kgf.

These specifications make the Case 580SM Series II 4WD PS Ext* a highly capable machine when it comes to loading and moving material. Its wide range of bucket width options makes it suitable for a variety of different applications, while its high breakout force ensures that it can handle even the toughest jobs with ease.

However, the machine’s high loading height may make it difficult to maneuver in tight areas, while its high breakout force may pose a risk of damage to delicate structures or surroundings if not used carefully.

Slew System and Loader Bucket Capacity

The Case 580SM Series II 4WD PS Ext* uses a twin ram slew system that provides precise control over the machine’s boom and bucket movements. This system is highly responsive and easy to use, making it ideal for a wide variety of applications.

The machine’s loader bucket capacity is 0.8m3, which is adequate for most loading and excavation tasks. The machine’s dump height is 2720mm, while its bucket width is 2080mm. These specifications make the machine well-suited for moving large quantities of material quickly and efficiently.

However, the machine’s loader bucket capacity may be insufficient for very large-scale excavation projects, and its dump height may limit its performance when working with very tall structures or in difficult terrain.

Engine and Transmission

The Case 580SM Series II 4WD PS Ext* is powered by a Case 445T M2 engine that delivers 71kW of power at 2200rpm. The engine has a displacement of 4.5 liters and four cylinders, which allows it to deliver strong, consistent performance even in the most demanding conditions.

The machine’s PS transmission system provides four-wheel drive and 42 forward gears, allowing it to reach a maximum speed of 39.9km/h. The machine’s pump flow is 144 liters per minute, while its relief valve pressure is 210 bar.

These specifications make the Case 580SM Series II 4WD PS Ext* a powerful and capable machine that is well-suited to a wide range of applications. Its four-wheel drive and high number of forward gears ensure that it can perform well in any terrain, while its powerful engine and hydraulics allow it to move large quantities of material quickly and efficiently.

However, the machine’s high speed and power may make it difficult to control in certain situations, and its high pump flow and relief valve pressure may be more than is required for some tasks, leading to unnecessary wear and tear on the machine.

Travel Length, Height, and Width

The Case 580SM Series II 4WD PS Ext* has a travel length of 6920mm, a travel height of 3420mm, and a width of 2080mm. These specifications make the machine well-suited to working in difficult terrain, allowing it to move easily through narrow spaces and over rough terrain.

However, the machine’s size may also make it difficult to maneuver in tight areas, and its height may limit its performance when working with very low structures or in areas with low clearance.

Turn Circle Radius and Operating Weight

The machine’s turn circle radius without brakes is 3850mm, making it highly maneuverable in tight spaces and easy to control in a variety of situations. Meanwhile, the machine’s operating weight of 7958kg makes it relatively lightweight compared to many other backhoe/loader combinations, allowing it to move quickly and easily over a variety of terrains.

However, the machine’s light weight may also limit its performance when working with very heavy materials or in areas with unstable ground, where a heavier machine would be required to maintain stability.

Overall Assessment

Overall, the Case 580SM Series II 4WD PS Ext* is a highly capable machine that is well-suited to a wide range of construction and agricultural applications. Its numerous features and specifications make it a popular choice for many operators in the industry, providing reliable performance and ease of use in even the most challenging conditions.

However, like any machine, the Case 580SM Series II 4WD PS Ext* has its strengths and weaknesses, and it is important for operators to carefully consider their specific needs and requirements before investing in this or any other backhoe/loader combination. With careful planning and careful use, however, the Case 580SM Series II 4WD PS Ext* can provide years of reliable service and efficient performance, making it an excellent choice for any operator in need of a powerful and versatile machine.