John Deere 510C, 1989 Technical Specifications
| SideShift or CenterMount | CM |
| SAE dig depth (mm) | 5000 |
| Reach @ ground level (mm) | 6070 |
| Loading height (mm) | 3960 |
| Bucket width, min-max (mm) | 305-914 |
| Bucket breakout (kgf) | 4990 |
| Dipper breakout (kgf) | 3450 |
| Slew System | Cylinder |
| Loader Bucket Capacity (m3) | 1.25 |
| Dump height (mm) | 2670 |
| Bucket width (mm) | 2340 |
| Bucket breakout (kgf) | 4170 |
| Engine Make & Model | JD 4-276T |
| Engine power (kW@rpm) | 63@2200 |
| Engine displacement (lit) | — |
| Number of cylinders | — |
| Pump type | CCRP |
| Pump flow (lit/min) | 133 |
| Relief valve pressure (bar) | 172.38 |
| Transmission type | PS TC |
| Drive | 2WD/4WD |
| Speeds, FR | 44 |
| Maximum speed (km/h) | 34 |
| Ride control (Std/Opt/NA) | — |
| Travel length (mm) | 7110 |
| Travel height (mm) | 3680 |
| Width (mm) | 2340 |
| Turn circle radius without brakes (mm) | — |
| Operating weight (kg) | 7000 |
| Model | 510C |
Introduction
John Deere 510C is a backhoe loader that was released in 1989. It is designed to perform various construction tasks, including digging trenches, excavating ditches, and loading material. This article analyzes the technical specifications of the John Deere 510C, focusing on the advantages and disadvantages of its features.
SideShift or CenterMount
The John Deere 510C has a CenterMount feature, which means that the backhoe is mounted in the center of the tractor. This design provides a more balanced weight distribution, which makes the tractor more stable and easier to operate on uneven terrain. Additionally, the CenterMount design allows for greater visibility and maneuverability, making it easier for the operator to work in confined spaces.
SAE dig depth (mm)
The SAE dig depth of the John Deere 510C is 5000mm. This depth is sufficient for most excavation tasks and allows the operator to dig deep trenches and excavate ditches efficiently.
Reach @ ground level (mm)
The reach at ground level of the John Deere 510C is 6070mm. This feature allows the operator to reach deep into excavations and dig up soil or other material from a distance. Additionally, the long reach feature enables the operator to position the machine accurately and safely.
Loading height (mm)
The loading height of the John Deere 510C is 3960mm. This feature allows the operator to load material, such as dirt or gravel, into a truck or other container easily. Additionally, the loading height enables the operator to work at a comfortable height, reducing the risk of injuries.
Bucket width, min-max (mm)
The minimum and maximum bucket width of the John Deere 510C are 305mm and 914mm, respectively. This feature allows the operator to use the machine for various tasks, from digging narrow trenches to excavating larger areas.
Bucket breakout (kgf)
The bucket breakout of the John Deere 510C is 4990kgf, while the dipper breakout is 3450kgf. These features enable the operator to dig up hard soil or gravel with ease.
Slew System
The John Deere 510C features a Cylinder Slew System, which provides smooth and precise movement of the backhoe. This system enables the operator to position the backhoe accurately, reducing the risk of accidents.
Loader Bucket Capacity (m3)
The loader bucket capacity of the John Deere 510C is 1.25m3. This capacity allows the operator to load and transport a large amount of material, saving time and effort.
Dump height (mm)
The dump height of the John Deere 510C is 2670mm. This feature allows the operator to unload the material from the loader bucket to a truck or other container at a reasonable height, reducing the risk of injuries.
Engine Make & Model
The John Deere 510C is equipped with a JD 4-276T engine, which provides 63kW of power at 2200rpm. This engine is designed to deliver reliable performance and fuel efficiency, reducing the cost of operation.
Engine displacement (lit)
The engine displacement of the John Deere 510C is not available.
Number of cylinders
The number of cylinders of the John Deere 510C is not available.
Pump type
The John Deere 510C features a CCRP pump, which provides a flow rate of 133 lit/min. This feature enables the machine to operate efficiently and complete tasks faster.
Relief valve pressure (bar)
The relief valve pressure of the John Deere 510C is 172.38 bar. This feature allows the machine to work under pressure without causing damage to the hydraulic system.
Transmission type
The transmission type of the John Deere 510C is PS TC, which provides smooth shifting and efficient power transfer.
Drive
The John Deere 510C is available in 2WD and 4WD drive options. The 4WD option provides better traction and stability on rough terrain, while the 2WD option is more suitable for operation in flat areas.
Speeds, FR and Maximum speed (km/h)
The John Deere 510C has a maximum speed of 34 km/h and features 44 forward and reverse speeds. This feature enables the operator to adjust the speed of the machine to suit the task, increasing efficiency and reducing the time required to complete tasks.
Ride control (Std/Opt/NA)
The ride control feature is not available in the John Deere 510C.
Travel length (mm), Travel height (mm), Width (mm), Turn circle radius without brakes (mm)
The travel length of the John Deere 510C is 7110mm, while the travel height is 3680mm. The width of the machine is 2340mm, and the turn circle radius without brakes is not available.
Operating weight (kg)
The operating weight of the John Deere 510C is 7000kg, which makes it stable and easy to operate.
Overall Assessment
The John Deere 510C is a versatile and reliable backhoe loader that provides numerous features and specifications designed to increase efficiency, reduce time required to complete tasks, and enhance safety. However, some factors, such as the absence of ride control and turn circle radius without brakes, may limit its effectiveness in some applications. Nevertheless, the John Deere 510C remains an innovative and efficient machine designed to meet contemporary construction needs.
